DSpace Repository
Research on the variability of the burnishing force during processing surfaces with 3D shape by using simultaneous 5-axis ball-burnishing process implemented on CNC milling machine
- DSpace Home
- →
- (e)Годишник на ТУ-Варна
- →
- Том 1 № 1 (2017)
- →
- View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.
| dc.creator | Slavov, Stoyan Dimitrov | |
| dc.creator | Iliev, Iliyan Velichkov | |
| dc.date.accessioned | 2018-04-16T19:13:30Z | |
| dc.date.accessioned | 2018-07-30T16:25:56Z | |
| dc.date.available | 2018-04-16T19:13:30Z | |
| dc.date.available | 2018-07-30T16:25:56Z | |
| dc.date.issued | 2017-12-28 | |
| dc.identifier | https://aj-tuv.org/index.php/ajtuv/article/view/20 | |
| dc.identifier | info:doi/10.29114/ajtuv.vol1.iss1.20 | |
| dc.identifier | urn:ISSN:2603-316X | |
| dc.identifier.uri | http://dspace.tu-varna.bg/handle/123456789/11 | |
| dc.description | The present research is focused on continuously measuring the variability of the burnishing force during conducting ball-burnishing process for specimens with surfaces with 3D shape, by using CNC milling machine with dual rotary table installed. For measuring the burnishing force and its variability, the specifically developed ball-burnishing tool with miniature force sensor was used. To assess the degree of influence of the main regime parameters on the variability of the burnishing force, the four factors full factorial experiment design with two levels per factor and four replications per run has been carried out. The experimental results are processed statisti-cally and techniques such as Pareto and ANOVA were used after that, for sorting them by degree of significance. Some conclusions about the magnitude and the causes of the obtained variability also are given. | |
| dc.format | application/pdf | |
| dc.language | eng | |
| dc.publisher | Technical university of Varna, Bulgaria | |
| dc.relation | https://aj-tuv.org/index.php/ajtuv/article/view/20/9 | |
| dc.rights | Copyright (c) 2017 Stoyan Dimitrov Slavov, Iliyan Velichkov Iliev | |
| dc.rights | http://creativecommons.org/licenses/by/4.0 | |
| dc.source | ANNUAL JOURNAL OF TECHNICAL UNIVERSITY OF VARNA, BULGARIA; Vol 1 No 1 (2017): Annual Journal of Technical university of Varna; 6-12 | |
| dc.source | ГОДИШНИК НА ТЕХНИЧЕСКИ УНИВЕРСИТЕТ - ВАРНА; Vol 1 No 1 (2017): Annual Journal of Technical university of Varna; 6-12 | |
| dc.source | ЕЖЕГОДНЫЙ ЖУРНАЛ ТЕХНИЧЕСКОГО УНИВЕРСИТЕТА ВАРНЫ, БОЛГАРИЯ; Vol 1 No 1 (2017): Annual Journal of Technical university of Varna; 6-12 | |
| dc.title | Research on the variability of the burnishing force during processing surfaces with 3D shape by using simultaneous 5-axis ball-burnishing process implemented on CNC milling machine | |
| dc.type | info:eu-repo/semantics/article | |
| dc.type | info:eu-repo/semantics/publishedVersion |
Files in this item
This item appears in the following Collection(s)
-
Том 1 № 1 (2017)
Първо издание на (е)Годишник на ТУ-Варна